A charging setup that fits your car,
your home and the way you live.
01 / READY WHEN YOU ARE
We install home EV chargers in Murrumbeena 3163, assessing the charger position, the switchboard and the cable route before confirming the scope. We explain the options and agree the work before anything starts.
A home EV charger installation gives an electric vehicle a dedicated place to charge when it is parked at home. Every installation is completed by a licensed electrician under REC 37324 and finished with a Certificate of Electrical Safety.
See how smart charging adapts02 / POWER, IN BALANCE
Watch how load management shares the available power.
01 / A quieter home
With less household demand, more of the available supply can go to charging. The home and car share the illustrated 40A limit.A quieter home leaves more capacity for the car. Together, they share the available supply.
Select a stage to explore the example.
Illustrative values, not live readings. The charger, vehicle, supply and configured limits determine actual charging. Load management may reduce the need for extra supply capacity; it does not replace a switchboard safety assessment. How Evnex manages household load.
| Stage | Home | EV | Total |
|---|---|---|---|
| Quieter home | 8A | 32A | 40A |
| Evening peak | 28A | 10A | 38A |
| Late night | 8A | 32A | 40A |
03 / REAL HOMES. REAL INSTALLATIONS.
Existing Voltra installations.
The details make the difference.
04 / THE RIGHT FIT
If the vehicle, charger type or existing electrical setup is still being worked out, that is fine. Voltra can assess the property and explain the practical options before work begins.
The aim is a dependable charging point that fits the way the household parks, drives and uses electricity. Before installation, Voltra checks the proposed charger location, the existing electrical equipment and the path for the dedicated cable. This keeps the finished setup clear, practical and suited to the individual home.
01 / CHARGERS WE INSTALL
We install or supply and install Tesla, Zappi, Wallbox, EVNEX, Ocular and Ohme home chargers. Choose the features around your vehicle and electrical setup.
Tethered means the cable is attached and ready to use. Socketed means you connect a separate charging cable.
02 / SINGLE OR THREE PHASE
Single-phase and three-phase homes have different charging options. Your vehicle’s AC charging capability also determines how much of a charger’s output it can use.
You don’t need to know your supply type before enquiring. We check it during the assessment.
03 / SOLAR & LOAD MANAGEMENT
Compatible chargers can adapt to household demand or use available solar energy. The right setup depends on your charger, metering and existing solar or battery system.
We explain what is practical for your home before recommending a setup.
TESLA WALL CONNECTOR
We install the Tesla Wall Connector in Melbourne homes, mounted where you park and connected on its own circuit from the switchboard.
Before installing, we check the switchboard, the supply and the cable route, then set the charger's current limit to suit your home and test the installation.
01 / SINGLE OR THREE PHASE
On single-phase power, a Wall Connector typically charges at up to about 7 kW. Three-phase homes can charge faster, up to what the car itself can accept.
02 / MORE THAN ONE CAR
Two or more Wall Connectors can be set up to share one supply and split the available power between cars.
03 / OTHER ELECTRIC CARS
It uses the Type 2 connector common in Australia, so it can charge many other electric cars too. We confirm it suits your car first.
Tesla and Wall Connector are trademarks of Tesla, Inc. Voltra Electrical is an independent electrical contractor.
05 / FROM FIRST LOOK TO FIRST CHARGE
We consider switchboard condition and capacity, the cable route, mounting surface and where you park. The scope is agreed before work starts.
Explore switchboard upgradesOn-site assessment of switchboard capacity and the cable route.
A fixed written quote before any work starts.
Installation of the dedicated circuit and required safety protection.
Mounting and connecting the charger.
Full testing of the completed installation.
Issue of the Certificate of Electrical Safety.
06 / BEFORE YOU PLUG IN
Yes. We cover every part of Murrumbeena (VIC 3163). Tell us your street and what you need, and we will confirm when we can be in Murrumbeena. We also cover Bentleigh East and Carnegie.
In most cases, yes. We look at where you park, the distance from the switchboard, and whether the board and supply can carry a charger alongside the home's other load. With 46% of Murrumbeena homes being separate houses, a garage or driveway wall is the usual position.
Many chargers can be set to use surplus solar or to run on a timer. About 2,090 small-scale solar systems have been installed in postcode 3163 since 2001 (Clean Energy Regulator), so it is a common question here. We look at the inverter, the switchboard and the charger's settings together.
Most straightforward installations are done in a day. The assessment confirms the cable route, switchboard capacity and charger location before work starts. If the property needs a more involved approach, that is set out in the fixed written quote.
Level 1 charging uses a standard powerpoint and is a slow trickle charge. A Level 2 charger is a dedicated wall-mounted charger on its own circuit and is several times faster for home charging. It is the usual choice for a practical overnight setup.
Voltra checks the switchboard during the assessment. The check looks at available capacity, the condition of the board and the required safety protection for a dedicated circuit. If related switchboard work is needed, it is explained before work begins.
No. Most Melbourne homes are single phase and can run a 7 kW charger, which is suitable for an overnight charge. Three-phase homes can support faster 22 kW-capable chargers, but Voltra checks what the property has during the assessment.
An apartment or unit installation can be possible, but shared electrical infrastructure and owners corporation approval may need to be considered. Voltra can review the practical installation path for the individual property. The assessment clarifies the available options before work begins.
YOUR HOME / YOUR AREA
Murrumbeena had about 10,000 residents and about 4,530 homes at the 2021 Census, with a median age of 37. 45% of Murrumbeena households had two or more cars at the 2021 Census, and 46% of homes are separate houses (25% are townhouses or semis). Most chargers here go on a garage, carport or driveway wall. In older homes the switchboard and main supply are checked first, because a 7 kW charger adds a large, long-running load. Neighbouring Bentleigh East (60%) and Carnegie (36%) sit either side of Murrumbeena on this measure.
In postcode 3163, about 2,090 rooftop solar systems have been installed since 2001 and 297 home batteries since July 2025 (Clean Energy Regulator). Homes with solar can often schedule charging for the middle of the day, which is worth planning before the charger is chosen.
Our Lalor base is about 26 km from Murrumbeena, which lies to the south, in Melbourne's south-east, around Murrumbeena Park and Murrumbeena station. Murrumbeena sits within the Glen Eira council area. The same service is available in nearby Bentleigh East, Carnegie and Malvern East.
Figures: ABS 2021 Census of Population and Housing; Clean Energy Regulator postcode data to August 2026.
Explore our full ev charger installation guide, or other electrical services available for your property in Murrumbeena.
YOUR EV INSTALLATION / LET’S GET STARTED
A few details about your car and home. We’ll help you plan the right installation.
No technical knowledge needed. Not sure about your charger or switchboard? That’s what we’re here for.
0495 096 344We use these details to respond to your enquiry. Privacy policy.
EV CHARGER INSTALLATION
