Replacing an old oven.
A new oven can draw more than the one it replaces. We check the circuit and cable before reusing the old connection.
OVEN INSTALLATION / DEEPDENE / 3103 Oven installation.
The right circuit.
Ready for dinner.
Wall ovens, pyrolytic ovens and freestanding cookers.
The circuit and safety switch checked first.
01 / START WITH THE OVEN’S RATING
Oven Installation
in Deepdene.
We install electric wall ovens, pyrolytic ovens and freestanding cookers in Deepdene 3103, checking the oven's rating against the circuit and safety switch first. Tell us about your property and what you have in mind, and we will explain the scope and the next step.
Some smaller wall ovens plug into a standard power point. Most electric ovens draw more than a power point can supply, so they are hard-wired on their own circuit by a licensed electrician.
Voltra Electrical installs electric ovens across Melbourne: wall ovens, double and pyrolytic ovens, and freestanding cookers. We check the model against your existing circuit and switchboard, then connect, test and certify the work.
Plan your oven installationA plug-in oven.
If your new oven has a plug, it still needs a suitable power point in the right spot. We can add or move one.
A new kitchen.
Send the oven model early so the circuit, switch and cabinet opening are planned before the joinery goes in.
02 / THE WORK, CONSIDERED
More than a swap.
A safe connection.
CONSIDERED / FROM START TO FINISH
Rating. Circuit. Safety switch.
Checked together.
We read the oven's rating and installation instructions, then check the existing circuit, cable and protection. A like-for-like swap on a sound circuit can be straightforward; a bigger oven may need a new circuit.
When we run a new oven circuit or alter the existing one, it is protected by a 30 mA safety switch (RCD) at the switchboard, as the wiring rules (AS/NZS 3000) require. If your oven circuit has no safety switch now, we will point it out.
Plan your oven installationOVENS & SAFETY SWITCHES
Does an oven need a safety switch?
Here is how it works.
A safety switch (RCD) cuts the power when it detects current leaking to earth, which reduces the risk of electric shock. For ovens, what is required depends on the work being done.
- A new oven circuit
- Under the wiring rules (AS/NZS 3000:2018), a new circuit for an oven or cooktop is protected by a 30 mA safety switch at the switchboard.
- Altering the circuit
- If the existing oven circuit is altered, for example extended or moved, the altered circuit needs safety switch protection too.
- A straight swap
- Replacing an oven on the same circuit, in the same place, can count as a repair. We still check the circuit and tell you if it has no safety switch.
- If it trips after install
- An oven that trips the safety switch can have a failed element, a wiring fault or moisture inside. Leave it off and call us rather than resetting it again and again.
We test the circuit and the safety switch after every oven installation and provide a Certificate of Electrical Safety.
OTHER KITCHEN APPLIANCES
Cooktops, dishwashers & more.
Connected properly.
A new oven is often part of a bigger kitchen change. We handle the electrical side of the other appliances too.
- Induction cooktops
- Most need a dedicated circuit from the switchboard. Our induction cooktop page explains what is involved.
- Rangehoods
- A power point or hard-wired connection above the cooktop, planned with the duct route.
- Dishwashers
- A suitable power point under the bench, positioned to the manufacturer’s instructions.
- Built-in appliances
- Microwaves, coffee machines and warming drawers need power points planned into the cabinetry.
- Hard-wired appliances
- Other fixed appliances are connected on their own circuit where the instructions require it.
03 / KNOW YOUR SETUP
Before the oven arrives.
Check these first.
The model number and installation instructions tell us most of what we need.
- Plug-in or hard-wired
- Ovens rated above what a standard power point can supply are hard-wired. Some smaller ovens use a 10 or 15 amp plug, and the outlet has to match.
- Circuit & cable
- Pyrolytic, double and large freestanding ovens draw more power. We confirm the circuit rating and cable size suit the model.
- Safety switch
- New or altered oven circuits are protected by a safety switch (RCD) at the switchboard.
- Cabinet & ventilation
- The opening size and ventilation come from the installation instructions. A 60 cm oven does not fit every 60 cm opening.
- Gas ovens
- Gas ovens with electric ignition or fans usually need a power point. A licensed gasfitter handles the gas connection.
- The old oven
- We can disconnect the old oven. Removal and disposal are agreed in the quote.
04 / FROM FIRST LOOK TO FINAL CHECK
Clear at every step.
- 01
Send the model
Tell us the oven model, your suburb and whether it replaces an existing oven.
- 02
Check the requirements
We check the rating, circuit, safety switch and cabinet opening, then confirm the work and price.
- 03
Install & connect
We disconnect the old oven if agreed, then connect the new one once it is in place.
- 04
Test & certify
We test the circuit and safety switch and provide a Certificate of Electrical Safety.
05 / BEFORE WE GET STARTED
Good questions.
Clear answers.
Do you provide oven installation in Deepdene?
Yes. We cover every part of Deepdene (VIC 3103). Tell us your street and what you need, and we will confirm when we can be in Deepdene. We also cover Balwyn and Canterbury.
Can you connect a new oven in my Deepdene home?
Yes. Send the oven's model number and we check its rating against your existing circuit and safety switch, so you know before delivery whether anything needs to change.
Do you work on period homes in Deepdene?
Yes. Period homes often have lath-and-plaster ceilings, decorative features and older wiring, so we plan access and fixings carefully and check the existing circuits before adding to them.
Can you install an oven I have already bought?
Yes. Send the model number and installation instructions first so we can confirm the circuit and the cabinet opening.
Do you install freestanding cookers?
Yes. A freestanding electric cooker with an oven and cooktop usually needs a dedicated, higher-rated circuit. We check yours against the model.
Can you remove the old oven?
We can disconnect it as part of the job. Lifting, removal and disposal are agreed before the visit.
What helps you quote?
The oven model, a photo of the kitchen and a photo of the switchboard with its cover closed. You do not need to pull the old oven out.
YOUR HOME / YOUR AREA
Deepdene.
A clearer next step.
Deepdene is a suburb of about 2,100 people (2021 Census), where 73% of homes are owner-occupied and 20% are rented. With an average of 2.6 people per household in Deepdene, oven upgrades are often about features such as pyrolytic cleaning rather than size. In older homes, the existing oven circuit may be too small for a new oven or may have no safety switch, which we check before connecting. For comparison, the share of homes that are separate houses in Deepdene (66%) is higher than in neighbouring Balwyn (58%) and Canterbury (64%).
From Lalor, Deepdene is roughly 17 km to the south, in Melbourne's inner east, near Deepdene Park and Whitehorse Road. Deepdene sits within the Boroondara council area. Next door, we also cover Balwyn, Canterbury, Kew and Camberwell.
Figures: ABS 2021 Census of Population and Housing.
Explore our full oven installation guide, or other electrical services available for your property in Deepdene.
Also serving nearby areas
OVEN INSTALLATION / LET’S GET STARTED
Plan your oven installation.
Start with your home.
Tell us about your oven installation project and suburb. We’ll review the details and discuss the next step.
Oven installation
A model number or a few photos can help, but you do not need to know the technical details.
0495 096 344We use these details to respond to your enquiry. Privacy policy.
OVEN INSTALLATION