An older home.
An installation with an uncertain history is worth understanding. We assess its condition and findings rather than assume age alone determines the work.
ELECTRICAL SAFETY INSPECTIONS / GLEN IRIS / 3146 Safety inspections.
A clearer picture.
Of your home.
An electrical assessment with a written record.
Understand the findings. Plan the next step.
01 / UNDERSTAND THE INSTALLATION
Safety Inspections & Reports
in Glen Iris.
We carry out home electrical safety inspections in Glen Iris 3146, with a written report that explains the findings and the next steps. Tell us about your property and what you have in mind, and we will explain the scope and the next step.
An older home, a planned renovation or a property purchase can raise questions about the electrical installation. A defined inspection scope helps turn those questions into useful findings.
Voltra Electrical carries out home electrical safety inspections across Melbourne. We inspect and test the agreed parts of the installation, record limitations and provide a written report explaining what needs attention.
Arrange an inspectionA property decision.
Buying or selling? Arrange access and agree the electrical scope so the report can inform the decision you are making.
A renovation ahead.
Review the existing installation before planning additions. Findings can help identify electrical work to consider alongside the renovation.
02 / THE WORK, CONSIDERED
The installation, assessed.
The findings, explained.
CONSIDERED / FROM START TO FINISH
Inspection and testing.
A record you can use.
The agreed scope can cover the switchboard and circuit protection, accessible wiring, earthing, outlets and lighting. We explain access requirements and record items that could not be inspected or tested.
The report sets out findings and recommended actions. It describes the assessment at the time; it is not a promise that every concealed defect can be found or that future faults cannot occur.
Arrange an inspectionBUYING A HOME?
Pre-purchase inspection.
Know what you are buying.
A pre-purchase electrical inspection shows the condition of the installation before you commit. We agree the scope with you and arrange access through the selling agent.
- Switchboard & safety switches
- The board's condition and circuit protection, and whether safety switches cover the power and lighting circuits. Safety switches are tested where access allows.
- Power circuits
- Power points are checked for damage, loose fittings, signs of overheating and correct operation.
- Lighting circuits
- Light fittings and switches are checked, including older fittings and any running hot.
- Air conditioning & fixed appliances
- Circuits for split systems, ducted heating and cooling, ovens, cooktops and electric hot water, where they can be accessed.
- Smoke alarms
- Whether alarms are present, where they are and whether they are within their service life.
- Wiring, earthing & past work
- Accessible wiring, the earthing system and signs of unfinished or non-compliant alterations.
- Room for your plans
- If you are planning an EV charger, induction cooking or more air conditioning, we note whether the switchboard and supply are likely to need changes.
- Written report
- A clear written report of what was inspected and tested, what we found and what needs attention, with any access limits recorded.
CERTIFICATES EXPLAINED
Certificate of Electrical Safety.
What it is. When you get one.
In Victoria, a Certificate of Electrical Safety is the legal record of electrical installation work. It is issued by a registered electrical contractor or licensed electrician and records the work done and the tests carried out.
- When you get one
- For electrical installation work such as new circuits, power points, lighting, air conditioning circuits and switchboard work. An inspection report is a different document.
- Prescribed work
- Higher-risk work, such as main switchboards, meter panels, main earthing, consumer mains and solar or battery systems, must be inspected by an independent licensed electrical inspector before it is turned on.
- Everyday work
- Lights, power points, air conditioning and hot water connections are non-prescribed work. They do not need an independent inspection, but still get a certificate.
- When it arrives
- For everyday work you should receive your copy within 30 days. For prescribed work, your copy follows once the inspection is done.
- Lost your certificate?
- Energy Safe Victoria can search for certificates lodged electronically for your property from July 2019 onwards.
- Rental safety checks
- A rental electrical safety check produces its own report. It is not the same document as a certificate.
03 / KNOW YOUR SETUP
Know what is covered.
Know what comes next.
A home assessment, a rental safety check and an independent inspection of prescribed electrical work serve different purposes. Tell us why you need the inspection.
- The agreed scope
- We establish which parts of the installation are included and any access restrictions. Confirm separate items, such as smoke alarm checks, when arranging the visit.
- A written report
- You receive the findings, recorded limitations and recommended actions. Any immediate concerns are explained, with proposed repairs treated as a separate scope.
- Rental requirements
- If the purpose is a scheduled rental electrical safety check, use our dedicated rental service so the appropriate scope and records can be confirmed.
- Certificates & independent inspections
- An assessment report is different from a Certificate of Electrical Safety for installation work. This home assessment is not the statutory independent inspection of prescribed work; tell us if that is the service you need.
04 / FROM FIRST LOOK TO FINAL CHECK
Clear at every step.
- 01
Tell us the purpose.
Share the suburb, property type and whether the assessment is for a purchase, renovation or general condition check.
- 02
Agree scope and access.
We confirm the areas and checks included, access arrangements and any specific report requirements before the visit.
- 03
Inspect and test.
We assess the agreed installation, record findings and limitations, and explain immediate concerns.
- 04
Receive a clear report.
We provide the written findings and recommended actions. You can then decide how to arrange any follow-up work.
05 / BEFORE WE GET STARTED
Good questions.
Clear answers.
Do you provide electrical safety inspections in Glen Iris?
Yes. We cover every part of Glen Iris (VIC 3146), on both the Boroondara and Stonnington sides of the council boundary. Send your street, the work you need and any access notes, and we will confirm availability and the next step. We also cover Camberwell and Hawthorn East.
When should I book a safety inspection in Glen Iris?
Common times are before buying, after moving in, before a renovation, or when something seems wrong (tripping, heat, buzzing). The report records what we tested and what we recommend.
Do you work on period homes in Glen Iris?
Yes. Period homes often have lath-and-plaster ceilings, decorative features and older wiring, so we plan access and fixings carefully and check the existing circuits before adding to them.
What does the inspection cover?
The scope is agreed before the visit. It can include switchboard protection, accessible wiring, earthing, outlets and lighting, with inspection and testing appropriate to the installation. Restrictions and items not checked are recorded.
Can you inspect a home before I buy it?
Yes, with permission and access arranged through the appropriate property contact. Tell us the intended purchase timing and any report requirements so we can confirm the scope and availability.
What does a pre-purchase electrical inspection check?
The switchboard and safety switches, power and lighting circuits, air-conditioning and fixed appliance circuits where accessible, smoke alarms, earthing and visible wiring. You receive a written report of the findings.
Does the report guarantee the whole property is safe?
No. It records the agreed assessment and findings at the time, including access and testing limitations. Concealed defects and future faults cannot all be ruled out by one inspection.
YOUR HOME / YOUR AREA
Glen Iris.
A clearer next step.
The 2021 Census counted about 11,000 dwellings in Glen Iris, home to about 26,130 people with a median age of 40. 33% of Glen Iris homes are mortgaged and 37% are owned outright, and an inspection is often booked before buying, after moving in, or before a renovation. In Glen Iris's older housing the inspection pays particular attention to the switchboard, earthing and the condition of older wiring. By comparison, the share of homes with a mortgage is lower in neighbouring Camberwell (29%) and Hawthorn East (28%).
385 home batteries have been installed in postcode 3146 since July 2025, on top of about 2,070 solar systems since 2001, according to the Clean Energy Regulator. Solar and battery systems add to what the switchboard has to manage, which we take into account.
From Lalor, Glen Iris is roughly 21 km to the south, in Melbourne's inner south-east, near Gardiners Creek and Glen Iris station. Glen Iris is split between the Boroondara council area (about 67% of the suburb) and Stonnington. We also work in neighbouring Camberwell, Hawthorn East, Malvern and Malvern East.
Figures: ABS 2021 Census of Population and Housing; Clean Energy Regulator postcode data to August 2026.
Explore our full safety inspections & reports guide, or other electrical services available for your property in Glen Iris.
Also serving nearby areas
ELECTRICAL SAFETY INSPECTIONS / LET’S GET STARTED
Your property.
A clearer picture.
Tell us why you need an electrical inspection. We’ll help confirm the scope and report you need.
Electrical safety inspections
No technical checklist needed. Share the purpose and any access considerations; we establish the checks with you.
0495 096 344We use these details to respond to your enquiry. Privacy policy.
ELECTRICAL SAFETY INSPECTIONS