Older protection.
Ceramic fuses and a lack of safety switches are good reasons to have your board assessed. Age alone does not tell the whole story: we look at the condition of the installation and the protection each circuit actually has.
SWITCHBOARD UPGRADES / MELBOURNE CBD / 3000 Switchboard
upgrades.
Ready for today.
From the original fuse board
to a more considered electrical setup.
01 / THE FOUNDATION OF YOUR HOME
Switchboard Upgrades
in Melbourne CBD.
From everyday appliances to your next EV charger, it all starts at the switchboard. We assess your existing setup, explain what needs attention and plan an upgrade around your home.
We carry out switchboard upgrades and fuse box replacements in Melbourne CBD 3000, assessing the existing board, circuit protection and any planned additions first. We agree the scope and the quote with you before any work begins.
Talk to us about your switchboardA fault that keeps returning.
Repeated tripping needs investigation. The cause could be an appliance, wiring or a circuit fault. We identify the problem before recommending a switchboard replacement.
More planned for your home.
An EV charger, induction cooking or a renovation can change what you need from the board. We check available space, circuit protection and the electrical supply before recommending additional work.
02 / WHAT CHANGES BEHIND THE COVER
Different jobs.
Working together.
A modern switchboard brings the right protective devices together. We explain what is being fitted and why it belongs in your installation.
- Circuit breakers
- Protect circuits against overloads and short circuits.
- Safety switches
- Detect current leaking from a circuit and disconnect power to reduce the risk of electric shock. They provide additional protection, not a guarantee against every electrical injury.
- Combined protection
- An RCBO combines safety-switch and circuit-breaker functions in one device. We select protection to suit the circuits and the installation.
- A clear, considered layout
- Labelled circuits, a suitable enclosure and space planned around the agreed work make the board easier to understand and maintain.
THREE-PHASE POWER
Three-phase upgrades.
More capacity, planned.
Most Melbourne homes have single-phase power. A three-phase supply spreads the load across three phases, which can suit homes adding large loads such as ducted air conditioning, a faster EV charger or a larger solar system. It is not always needed, so we check first.
- Do you need it?
- We look at what the home runs now and what you plan to add. Sometimes a switchboard upgrade or load management on single phase is enough.
- Distributor approval
- Changing the supply needs approval from your electricity distributor. We lodge the request through your retailer and coordinate the connection.
- Meter, mains & switchboard
- A three-phase supply usually involves a new meter, a larger mains cable to the board and a switchboard set up for three phases.
- Planned power interruption
- The changeover needs the power off. We agree the timing with you and the distributor before the day.
- Testing & certificate
- We test the installation and provide a Certificate of Electrical Safety for the electrical installation work.
SURGE PROTECTION
Surge protection.
Fitted at the switchboard.
A surge protection device in the switchboard helps protect the home's wiring and appliances from sudden voltage spikes, such as those from lightning or faults on the network. It is often added during a switchboard upgrade.
- What it does
- It diverts a sudden spike in voltage to earth before it travels through your circuits. It reduces the risk of damage; it cannot stop every surge.
- Not a safety switch
- Surge protection guards equipment against voltage spikes. Safety switches protect people from electric shock. A modern board can have both.
- Whole house or power board
- A switchboard device covers the whole installation. Plug-in surge boards add a second layer for TVs, computers and other sensitive equipment.
- What it needs
- Space on the board and a sound earth. We check both, and fit it with an upgrade or as a separate job.
- Solar, batteries & EV chargers
- Homes with solar inverters, batteries or EV chargers have more electronics on the supply, so surge protection is worth discussing at the same time.
- Check the indicator
- Many devices have a status window that shows when the cartridge needs replacing, like the one pictured.
SOLAR, BATTERY & EV READY
Ready for what comes next.
Solar, a battery or an EV.
Solar, home batteries and EV chargers all connect through the switchboard. Planning for them during an upgrade saves reworking the board later.
- Space for new circuits
- We leave room on the board for the circuits and protection that new equipment will need.
- Supply & capacity
- We check the main switch rating and supply against what you plan to add, and explain if load management or a supply upgrade is worth considering.
- EV chargers
- A home charger usually needs its own circuit. Planning it with the upgrade avoids opening the board twice.
- Working with your solar installer
- If a solar or battery installer is connecting later, we prepare the board and can coordinate with them.
- Clear labelling
- Solar and battery systems add extra isolation points. Clear labels help anyone working on the board later.
WHAT AFFECTS THE PRICE
What affects the price?
The factors, explained.
Every switchboard is different, so we give a fixed written price after seeing yours. These are the things that change it.
- Number of circuits
- More circuits mean more protection devices, and every circuit is tested.
- Safety switch arrangement
- Individual safety switches (RCBOs) on each circuit, or shared safety switches, change the parts and the layout.
- The meter panel
- Older meter panels can be worn or may contain asbestos. If the panel needs replacing or specialist removal, we explain that before quoting.
- Earthing & existing wiring
- Testing can find earthing or wiring faults that need fixing before the new board is turned on.
- Mains & supply
- Some upgrades also need a new mains cable or a supply change through your distributor.
- Independent inspection
- A main switchboard replacement is inspected by an independent licensed electrical inspector before power is restored.
03 / REAL VOLTRA WORK
Same home.
A new beginning.
The genuine before and after of one Voltra switchboard upgrade. The original fuse board gives way to a new enclosure with individually labelled circuit protection.
SCROLL TO REVEAL
Before
After
04 / FROM FIRST LOOK TO FINAL CHECK
Clear at every step.
- 01
Assess the existing setup.
We check the board, existing circuits, earthing and planned additions. Tell us about any recurring faults and what you want to add in future.
- 02
Agree on the work.
You receive a clear scope and written price. We explain the proposed equipment, any additional work and the planned power interruption before booking.
- 03
Install, label and test.
We replace the agreed equipment, identify the circuits and carry out electrical testing. Any existing wiring issues are explained rather than hidden by a new enclosure.
- 04
Inspect and hand over.
For a residential main switchboard replacement, an independent licensed electrical inspector must inspect the work before power is restored. We arrange the required inspection and Certificate of Electrical Safety, and explain your new setup.
05 / BEFORE YOU BOOK
Good questions.
Clear answers.
Do you provide switchboard upgrades in Melbourne CBD?
Yes. We cover every part of Melbourne CBD (VIC 3000), on both the Melbourne and Port Phillip sides of the council boundary. Send your street, the work you need and any access notes, and we will confirm availability and the next step. We also cover Carlton and East Melbourne.
Does my Melbourne CBD home need a switchboard upgrade?
Not always. In newer Melbourne CBD homes the board is usually modern; the question is whether it has room and capacity for what you want to add. We inspect the board and explain what needs to change before any work is agreed.
Does switchboard upgrades in a Melbourne CBD apartment need owners corporation approval?
It depends on the building's rules. Work that touches common property, the building's structure or shared services usually needs approval, while work inside your own apartment may not. 99% of homes in Melbourne CBD are flats or apartments, so we check the building's requirements with you before booking.
Will I receive a Certificate of Electrical Safety?
Yes. Electrical installation work in Victoria requires a Certificate of Electrical Safety. A residential main switchboard replacement also requires independent inspection before it is energised. Voltra Electrical is a registered electrical contractor, REC 37324.
Do you do three-phase power upgrades?
Yes. We first check whether three-phase is actually needed for what you plan to run. If it is, we handle the switchboard work and lodge the supply request through your retailer for the distributor's approval.
My safety switch keeps tripping. Do I need a new switchboard?
Not necessarily. Tripping usually points to a fault on a circuit or an appliance rather than the board itself. We find the cause first and explain whether the safety switch or the board needs to change.
Can you fit a surge protector to my switchboard?
Usually, yes. A whole-house surge protection device fits in the switchboard if there is space and a sound earth. We check both and can fit it during an upgrade or as a separate job. It reduces the risk of damage from voltage spikes but cannot prevent every surge.
YOUR HOME / YOUR AREA
Melbourne CBD.
A clearer next step.
About 54,900 people live in Melbourne CBD, in about 27,480 occupied homes (2021 Census). Melbourne CBD has homes from several decades, so boards range from original fuse panels to modern safety-switch boards. 13% of homes are mortgaged, and an upgrade is often planned alongside a renovation, solar, or an EV charger. Neighbouring Carlton (13%) and East Melbourne (27%) sit either side of Melbourne CBD on this measure.
In postcode 3000, 114 rooftop solar systems have been installed since 2001 (Clean Energy Regulator). Solar inverters and batteries connect at the switchboard, so its space and protection matter as more homes add them.
Melbourne CBD is about 18 km south of our Lalor base, in the centre of Melbourne, around Federation Square and Southern Cross Station. Melbourne CBD is split between the Melbourne council area (about 82% of the suburb) and Port Phillip. Next door, we also cover Carlton, East Melbourne, North Melbourne and Parkville.
Figures: ABS 2021 Census of Population and Housing; Clean Energy Regulator postcode data to August 2026.
Explore our full switchboard upgrades guide, or other electrical services available for your property in Melbourne CBD.
Also serving nearby areas
YOUR SWITCHBOARD UPGRADE / LET’S GET STARTED
Your switchboard.
Your next step.
Tell us about your property and what you have planned. We’ll help you work out the right switchboard upgrade.
Switchboard upgrade
No technical knowledge needed. Share what you know and we’ll assess the board, protection and supply.
0495 096 344We use these details to respond to your enquiry. Privacy policy.
SWITCHBOARD UPGRADE