Everyday outlets.
Place power where it is needed for benches and compatible equipment, rather than planning around extension leads.
POWER TO SHEDS & GARAGES / MERNDA / 3754 Power to sheds & garages.
Space to work.
Power with a plan.
Lighting, outlets and equipment connections.
Designed around what the space needs to do.
01 / MAKE THE SPACE MORE USEFUL
Power to Sheds & Garages
in Mernda.
We run power to sheds, garages and workshops in Mernda 3754, planning the cable route, outlets, lighting and any sub-board. We explain the options and agree the work before anything starts.
A garage used for tools has different electrical needs from a shed used for storage. Start with the equipment and everyday tasks, then plan the supply.
Voltra Electrical installs power and lighting for Melbourne garages and sheds. We assess existing capacity, the route from the house and the building itself before agreeing the electrical scope.
Plan your shed or garage powerUseful work lighting.
Consider benches, door positions and shadows when planning the lighting layout.
A detached building.
A new supply route can involve underground or other suitable cabling arrangements and coordinated site work.
02 / THE WORK, CONSIDERED
A more useful space.
A considered installation.
CONSIDERED / FROM START TO FINISH
Start with the equipment.
Then size the installation.
Share the tools and appliances you expect to use, especially higher-demand equipment. Ratings and intended simultaneous use help us assess the supply and protection required.
Distance alone does not determine a cable size or price. Route, installation conditions, capacity and any trenching or restoration all form part of the site assessment.
Plan your shed or garage powerRUNNING POWER TO A SHED
Power to a detached shed.
What is involved.
Running power to a shed or detached garage means getting a cable safely from the house to the building, then planning what happens inside it.
- The cable route
- Usually an underground cable in conduit from the house to the shed. The route avoids other services and is agreed before any digging.
- Trenching
- We agree who digs the trench and how deep it needs to be before work starts, so the cable can go in as soon as it is ready.
- Cable size
- Longer runs and bigger loads need a larger cable to keep the voltage up at the shed. We size it for what you plan to run.
- A sub-board
- A small switchboard in the shed or garage gives it its own main switch and safety switches, like the one pictured. It suits workshops, heavy tools or a future EV charger.
- Power points & lighting
- Planned around benches, doors and storage, with fittings suited to dust and the occasional damp.
- Testing & certificate
- We test the new circuits and provide a Certificate of Electrical Safety.
03 / KNOW YOUR SETUP
Plan the use.
Assess the route.
A simple sketch, equipment list and photos of the building are useful starting points.
- Equipment demand
- Tool ratings and intended use matter. A new outlet does not increase the capacity available from an existing circuit.
- Supply & protection
- We assess the existing switchboard and proposed installation before confirming circuits or a separate distribution board.
- Cable route
- Detached structures may require excavation or other site work. Confirm existing services and responsibilities before ground disturbance.
- Building conditions
- Weather exposure, dust, access and the structure influence fitting selection and installation methods.
04 / FROM FIRST LOOK TO FINAL CHECK
Clear at every step.
- 01
Describe the space
Tell us the building location, intended use and equipment.
- 02
Assess supply & access
We inspect capacity, the route and any site preparation required.
- 03
Install agreed circuits
We complete the quoted power and lighting installation.
- 04
Test & document
We test the work, explain circuit use and provide electrical safety documentation.
05 / BEFORE WE GET STARTED
Good questions.
Clear answers.
Do you provide power to sheds and garages in Mernda?
Yes. We cover every part of Mernda (VIC 3754). Include your street and a short description of the job, and we will come back to you about timing. We also cover Doreen and South Morang.
Can you run power to my shed in Mernda?
Yes. We plan the cable route (underground or along a structure), the outlets and lighting, and whether a sub-board is needed. The distance from the switchboard affects the cable size.
My Mernda home is only a few years old. Is power to sheds and garages straightforward?
Usually. Newer homes generally have a modern switchboard with safety switches, although insulation, ceiling space and slab construction still affect cable routes. 55% of Mernda homes were mortgaged at the 2021 Census.
Can you run power to a detached shed?
We can assess the project. Supply capacity, distance, cable route, building conditions and any excavation determine the installation approach.
Will I need a separate switchboard in the garage?
Not every job needs one. The circuits, demand and installation arrangement determine what is appropriate.
Can I run workshop tools from normal powerpoints?
That depends on each tool’s requirements and the circuit. Send the equipment ratings so suitable connections and capacity can be assessed.
What affects the cost of running power to a shed?
The distance from the switchboard, the cable size, who does the trenching, whether a sub-board is needed and what goes inside the shed. We give a fixed written price after seeing the site.
YOUR HOME / YOUR AREA
Mernda.
A clearer next step.
About 23,400 people live in Mernda, in about 7,530 occupied homes (2021 Census). 89% of Mernda homes are separate houses, and 64% of households run two or more cars, so garages and sheds are common. A sub-board in the garage is common when there is heavy equipment or a future EV charger. We check what the main switchboard can supply first. By comparison, the share of households with two or more cars is higher in neighbouring Doreen (71%) and South Morang (68%).
In postcode 3754, about 7,630 rooftop solar systems have been installed since 2001 and 980 home batteries since July 2025 (Clean Energy Regulator). Garages are a common spot for batteries and EV chargers, so the cable size and sub-board are worth planning with future load in mind.
Mernda is about 10 km north-east of our Lalor base, in Melbourne's outer north, near Mernda Village and Mernda station. Mernda sits within the Whittlesea council area. Next door, we also cover Doreen, South Morang, Wollert and Mill Park.
Figures: ABS 2021 Census of Population and Housing; Clean Energy Regulator postcode data to August 2026.
Explore our full power to sheds & garages guide, or other electrical services available for your property in Mernda.
Also serving nearby areas
POWER TO SHEDS & GARAGES / LET’S GET STARTED
Plan your shed or garage power.
Start with your home.
Tell us about your power to sheds & garages project and suburb. We’ll review the details and discuss the next step.
Power to sheds & garages
A model number or a few photos can help, but you do not need to know the technical details.
0495 096 344We use these details to respond to your enquiry. Privacy policy.
POWER TO SHEDS & GARAGES